Pfam( )是一个被广泛使用的蛋白家族数据库,在最新的版本26.0中包含超过13000个手工确定的蛋白家族,Pfam可以通过 使用,他有两个数据库,高质量,手工确定的Pfam-A,自动注释的Pfam-B数据库。后面的数据产生是根据ADDA算法。是对A的补充。


PfamScan.pl工具( ) 数据库( ),按照说明书,我下载的是



Perl 和bioperl的安装 我的已经安装过了,据说可以通过一下方法安装
 sudo apt-get install perl ( replace perl with bioperl for installation of bioperl)

 sudo -i ( the system will ask for password type it in and youll find the user name change to root marked in red. its ready to go now) (因为之前没有权限,没用这一步,所以安装不来,导致后面的报错)
 then use CPAN to install Moose use this:
 CPAN Moose ( this will take a while)


 tar zxf hmmer-3.1b1.tar.gz
 cd hmmer-3.1b1
 make check
 make install
 cd easel;make install
 修改环境变量:export PATH=/sam/hmmer/binaries:$PATH(这个是针对bash而言的)
 这个时候可以通过在终端输入:hmmscan -h 来检验是否安装成功
 export PERL5LIB=/sam/hmmmer/pfamscan:$PATH (含有
 (the path to your should be listed if it is successfully added)可以通过如下命令来查看环境变量是否修改成功
 perl -V


 What we’re doing in a nutshell is telling PERL to push values on to the @INC array before loading any modules. You can do this on the command line, in your PERL code or with the environment variable PERL5LIB.
 PERL5LIB can contain more than one value. Just set it in you .bashrc file or wherever you see fit. This method works in bash:
 export PERL5LIB=/first/path/to/libs"${PERL5LIB:+:$PERL5LIB}"


hmmpress Pfam-A.hmm
hmmpress Pfam-B.hmm

使用说明: -fasta -dir
 Additonal options:
 -h : show this help
 -o : output file, otherwise send to STDOUT
 -clan_overlap : show overlapping hits within clan member families (applies to Pfam-A families only)
 -align : show the HMM-sequence alignment for each match
 -e_seq : specify hmmscan evalue sequence cutoff for Pfam-A searches (default Pfam defined)
 -e_dom : specify hmmscan evalue domain cutoff for Pfam-A searches (default Pfam defined)
 -b_seq : specify hmmscan bit score sequence cutoff for Pfam-A searches (default Pfam defined)
 -b_dom : specify hmmscan bit score domain cutoff for Pfam-A searches (default Pfam defined)
 -pfamB : search against Pfam-B HMMs (uses E-value sequence and domain cutoff 0.001),
 in addition to searching Pfam-A HMMs
 -only_pfamB : search against Pfam-B HMMs only (uses E-value sequence and domain cutoff 0.001)
 -as : predict active site residues for Pfam-A matches
 -json [pretty] : write results in JSON format. If the optional value "pretty" is given,
 the JSON output will be formatted using the "pretty" option in the JSON
 For more help, check the perldoc:
 shell% perldoc


/sam/hmmer/PfamScan/ -fasta contig_proteins.fasta -dir /sam/hmmer/PfamScan/lib -pfamB -out contig_pfam.fasta

 There is no difference for the user.
 The extra numerals after the . are for internal auditing and have no meaning
 for the results. In effect both are PF00013.24 - that is: version 24 since
 first creation of family.


# < seq id> < alignment start> < alignment end> < envelope start> < envelope end> < hmm acc>
 < hmm name> < type> < hmm start> < hmm end> < hmm length> < bit score> < E-value> < significance>
 < clan>
 1_1 111 424 110 425 PF01979.15 Amidohydro_1 Domain 2 332
 333 185.8 1.5e-54 1 CL0034
 1_2 30 130 30 130 PF13600.1 DUF4140 Family 1 104
 104 52.1 6.7e-14 1 No_clan

这里的PF代表的是pfam-A,PB代表的是pfam-B数据库。 clan表示上一级的分类

利用官网首页”Jump to”功能,检索注释出来的详细的信息:

Pfam A accession, e.g. PF02171
Pfam A identifier, e.g. piwi
Pfam B accession, e.g. PB000001
Pfam B identifier, e.g. Pfam-B_1
UniProt sequence accession, e.g. P00789
UniProt sequence ID, e.g. CANX_CHICK
NCBI "GI" number, e.g. 113594566
NCBI secondary accession, e.g. BAF18440.1
Pfam clan accession, e.g. CL0005
metaseq ID, e.g. JCVI_ORF_1096665732460
metaseq accession, e.g. JCVI_PEP_1096665732461
Pfam clan accession, e.g. CL0005
Pfam clan ID, e.g. Kazal
PDB entry, e.g. 2abl
Proteome species name, e.g. Homo sapiens


  1. pfam团队的邮箱。有问题就可以问他们
  2. Can’t locate Bio/Pfam/Scan/ in @INC (@INC contains: /etc/perl /usr/local/lib/perl/5.14.2 /usr/local/share/perl/5.14.2 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.14 /usr/share/perl/5.14 /usr/local/lib/site_perl .) at /sam/hmmer/PfamScan/ line 8. BEGIN failed–compilation aborted at /sam/hmmer/PfamScan/ line 8.这个问题折腾了我很久,最后我改了两点,一个就是通过cpan下载Moose,另一个就是修改了pfam_scan.pl的环境变量,就OK了。那就根据我博文中提到的PERL5LIB,我觉得应该是第二个原因。反正问题解决了,who care 呢?


文献:The Pfam protein families database

官网说明说 readme


Brain Goo的博客:



Sam avatar
About Sam
专注生物信息 专注转化医学